English
What to Note When Using Specialized Saw Blades for Sintered Stone? Zhejiang Huifeng Seiko Tells You
Created on 09.28
When using specialized saw blades for sintered stone, the following points need to be noted:
- Confirm the material to be cut and its thickness: Before using the specialized saw blade for sintered stone, you need to confirm the material to be cut and its thickness. Different materials and thicknesses require the selection of different specialized saw blades for sintered stone and corresponding cutting parameters.
- Choose the appropriate saw blade: Select a suitable specialized saw blade for sintered stone based on factors such as the material, thickness of the sintered stone to be cut, and the working environment. Generally speaking, parameters of the specialized saw blade for sintered stone, such as outer diameter, thickness, cutter head material, and number of teeth, need to be chosen according to actual conditions.
- Adjust cutting parameters: When cutting sintered stone with the specialized saw blade, it is necessary to adjust the cutting parameters according to the actual situation, such as cutting speed, feed speed, and cutting pressure. Different cutting parameters will affect the cutting effect and efficiency.
- Keep the saw blade clean: During the cutting process, it is necessary to keep the specialized saw blade for sintered stone clean to prevent debris, dust, and other substances from affecting the cutting effect. If there is debris or dust on the specialized saw blade for sintered stone, it should be cleaned in a timely manner.
- Pay attention to cooling and lubrication: During the cutting process, the specialized saw blade for sintered stone needs to be cooled and lubricated. Cooling can prevent the saw blade from overheating, while lubrication can reduce friction and extend the service life of the specialized saw blade for sintered stone.
- Avoid excessive load: During the cutting process, it is necessary to avoid subjecting the specialized saw blade for sintered stone to excessive load. Excessive load may cause problems such as deformation and fracture of the saw blade, affecting the cutting effect and safety.
- Replace the cutter head in a timely manner: The cutter head of the specialized saw blade for sintered stone is a wearing part and needs to be replaced in a timely manner. If the cutter head is severely worn or has other issues, it should be replaced with a new one promptly to ensure the cutting effect and safety.